---
title: Replace your Progressing Cavity Grinders with a Shark | Hayes Pump, Inc.
description: Replace your Progressing Cavity Grinders with a Shark
---

[Hayes Blog](https://blog.hayespump.com/blog)

# [Replace your Progressing Cavity Grinders with a Shark | Hayes Pump, Inc.](https://blog.hayespump.com/blog/progressive-cavity-grinder-replacement-shark)

 Written by [DDNAMDawn](https://blog.hayespump.com/blog/author/ddnamdawn) | Apr 27, 2020 8:43:04 PM

The [Zoeller](https://hayespump.com/portfolio/zoeller-submersible-solids-pumps/) Shark Series 6932 Replacement Assembly readily adapts to existing progressing cavity grinder pump systems, including the E-One Grinder Pump.  They are 100% factory tested before shipment.

- Meets UL, CSA, and NSF Pump Standards
- 1 HP, 230 volts, 60 Hz, 7.0 FLA
- 2 HP, 230 volts, 60 Hz, 10.5 FLA
- Electrical Quick-Disconnect (EQD) Plug
- Stainless steel hydraulic rotor with protective deflector plate
- Integral pressure relief valve
- Stainless steel fitted cover, stand, discharge, piping valves and fittings
- Finned, Class 30 cast iron construction
- Corrosion-resistant, powder coated epoxy finish
- Discharge size - 1-1/4" NPT
- Oil-filled motor with integral thermal overload protection
- Viton seals and SC/C mechanical shaft seal
- Hardened 440 C stainless steel cutter and disc, Rockwell C55-60
- Stainless steel check valve
- Red lifting rope
- Anti-siphon device (optional)

## RWD 7020 & 7021 systems with internally mounted level control

- Sanitary sewage pumping stations
- Pressure sewage systems
- Commercial and residential sewage removal

### Pump Specifications:

- Discharge: 1-1/4” NPT horizontal
- Seals – Silicon Carbide/Carbon, Buna-N elastomers
- Construction – motor housing, cover, adapter and pump housing cast iron ASTMA A-48, Class 30, 30,000# tensile strength, corrosion-resistant, powder coated epoxy finish
- Attaching hardware – 304 stainless steel
- Square ring and gasket – Viton
- Stainless steel cutter and plate hardened to Rockwell C 55-60
- Pressure relief valve
- Stainless steel legs provide for free-standing installation
- Stainless steel helix hydraulic rotor
- Buna-N hydraulic stator

### Motor Specifications:

- Permanent split capacitor (PSC) motor
- Stator – Class B insulation and lead wires, Nema B design
- Integral thermal overload protection with automatic reset
- Housing – Finned cast iron, oil-filled
- 416 stainless steel motor shaft
- Upper and lower ball bearings – dual, high carbon chromium steel
- 20' (6 m) power cord with 15 amp plug (extended cord lengths available)

## Basin Assembly

- These Zoeller rotomolded basins and basin package systems are a cost-efficient alternative for a job-ready package system for LPS.
- Standard basin size is 30" x 72" with the option to add a 12" or 24" riser for a depth up to 96".
- Zoeller's flex hose disconnect allows for the removal of the pump without the need to enter the basin. Available discharge depth at 24", hard pipe with disconnect with discharge at 36".
- Zoeller Z-Rail® allows easy install and removal of the pumps without the need to remove the discharge piping or enter in the basin. Discharge depths available at 24" and 36".

## Control Panels (optional)

- NEMA 4X, lockable enclosure
- UL and CSA approved
- Alarm for high water with redundant pump run
- RJ45 jack for online monitoring and reporting
- Optional generator receptacle, 230 Volt 1 Phase, 20 Amp, automatic transfer switch
- Optional Z Control® Gateway features
- Used to replace existing panel when required

[View full post](https://blog.hayespump.com/blog/progressive-cavity-grinder-replacement-shark)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "DDNAMDawn"
  },
  "dateModified" : "2021-01-26T14:43:24.306Z",
  "datePublished" : "2020-04-27T20:43:04Z",
  "headline" : "Replace your Progressing Cavity Grinders with a Shark",
  "image" : {
    "@type" : "ImageObject",
    "height" : 300,
    "url" : "https://f.hubspotusercontent00.net/hubfs/8219255/Imported_Blog_Media/Zoeller-6932-Low-Pressure-sewer-system-pump-221x300.jpg",
    "width" : 221
  },
  "mainEntityOfPage" : "https://blog.hayespump.com/blog/progressive-cavity-grinder-replacement-shark",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "Hayes Blog"
  }
}
```